• Our team is looking to connect with folks who use email services provided by Plesk, or a premium service. If you'd like to be part of the discovery process and share your experiences, we invite you to complete this short screening survey. If your responses match the persona we are looking for, you'll receive a link to schedule a call at your convenience. We look forward to hearing from you!
  • The BIND DNS server has already been deprecated and removed from Plesk for Windows.
    If a Plesk for Windows server is still using BIND, the upgrade to Plesk Obsidian 18.0.70 will be unavailable until the administrator switches the DNS server to Microsoft DNS. We strongly recommend transitioning to Microsoft DNS within the next 6 weeks, before the Plesk 18.0.70 release.
  • The Horde component is removed from Plesk Installer. We recommend switching to another webmail software supported in Plesk.

Nginx IP problem when server reboot

drauta

New Pleskian
Good Morning!
When I reboot my centOS 6.5 + Plesk 11.5 server, Nginx doesn't start and every time I need to go to Server > IP Addresses and click Reread IP.
Then Plesk says that need to repair one of these ips, I click repair and then Nginx can start. ( I have 3 ips [2 ipv4 and 1 ipv6] )
Anybody know anything about this issue?
Thanks!
 
If I correctly understood nginx works and starts fine now?
 
[LINUX PLESK 11.5 / Centos6.3] Nginx don't RESTART after REBOOT - failed (99)

I have the same problem :

---------------------------------------------------------------
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE

Parallels Plesk Panel 11.5.30 Update #47 CentOS 6.5 (Final) (64-bit)

PROBLEM DESCRIPTION

After a server reboot, Nginx doesn't work.
After REBOOT, The CPU process is very, very high... (Apache, MySQL, & Plesk Panel) during 10 min.

STEPS TO REPRODUCE

Reboot server by terminal command # reboot

ACTUAL RESULT

Nginx is disabled.

EXPECTED RESULT

Nginx is enabled.

ANY ADDITIONAL INFORMATION

I try this solution : (http://kb.parallels.com/en/114245 [^])
But doesn't work

For Nginx up & Running, need to run the command - after reboot :

Code:
# service nginx restart

LOGS Errors / Nginx (after reboot)
Code:
2014/06/25 12:42:48 [emerg] 2995#0: bind() to [2001:41d0:2:1de3::]:80 failed (99: Cannot assign requested address)

LOGS /var/logs/messages - after reboot

Code:
Jun 25 12:42:49 ns205478 named[3241]: ----------------------------------------------------
Jun 25 12:42:49 ns205478 named[3241]: BIND 9 is maintained by Internet Systems Consortium,
Jun 25 12:42:49 ns205478 named[3241]: Inc. (ISC), a non-profit 501(c)(3) public-benefit 
Jun 25 12:42:49 ns205478 named[3241]: corporation.  Support and training for BIND 9 are 
Jun 25 12:42:49 ns205478 named[3241]: available at [URL]https://www.isc.org/support[/URL]
Jun 25 12:42:49 ns205478 named[3241]: ----------------------------------------------------
Jun 25 12:42:49 ns205478 named[3241]: adjusted limit on open files from 4096 to 1048576
Jun 25 12:42:49 ns205478 named[3241]: found 8 CPUs, using 2 worker threads
Jun 25 12:42:49 ns205478 named[3241]: using up to 4096 sockets
Jun 25 12:42:49 ns205478 named[3241]: loading configuration from '/etc/named.conf'
Jun 25 12:42:49 ns205478 named[3241]: using default UDP/IPv4 port range: [1024, 65535]
Jun 25 12:42:49 ns205478 named[3241]: using default UDP/IPv6 port range: [1024, 65535]
Jun 25 12:42:49 ns205478 named[3241]: listening on IPv6 interfaces, port 53
Jun 25 12:42:49 ns205478 named[3241]: listening on IPv4 interface lo, 127.0.0.1#53
Jun 25 12:42:49 ns205478 named[3241]: listening on IPv4 interface eth0, 94.23.28.227#53
Jun 25 12:42:49 ns205478 named[3241]: listening on IPv4 interface eth0:1, 87.98.160.204#53
Jun 25 12:42:49 ns205478 named[3241]: generating session key for dynamic DNS
Jun 25 12:42:49 ns205478 named[3241]: sizing zone task pool based on 3 zones
Jun 25 12:42:49 ns205478 named[3241]: set up managed keys zone for view _default, file 'dynamic/managed-keys.bind'
Jun 25 12:42:49 ns205478 named[3241]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 0.IN-ADDR.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 127.IN-ADDR.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 254.169.IN-ADDR.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 2.0.192.IN-ADDR.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 100.51.198.IN-ADDR.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 113.0.203.IN-ADDR.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 255.255.255.255.IN-ADDR.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: D.F.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 8.E.F.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 9.E.F.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: A.E.F.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: B.E.F.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: automatic empty zone: 8.B.D.0.1.0.0.2.IP6.ARPA
Jun 25 12:42:49 ns205478 named[3241]: command channel listening on 127.0.0.1#953
Jun 25 12:42:49 ns205478 named[3241]: zone 0.0.127.IN-ADDR.ARPA/IN: loaded serial 20010622
Jun 25 12:42:49 ns205478 named[3241]: zone 28.23.94.in-addr.arpa/IN: loaded serial 1403099053
Jun 25 12:42:49 ns205478 named[3241]: managed-keys-zone ./IN: loaded serial 0
Jun 25 12:42:49 ns205478 named[3241]: running



Can you help me ?
 
Back
Top