Client host rejected: Access denied

[Eraklion]

Hello.

I migrate from plesk 9.5 to another server with plesk 12.0.18, and then outlook and mail default from iphone don't work, but tunderbird and webmail work well.

In outlook when i put the same configuration than tunderbird and i try to send mail out from my domain said this error:

Error del servidor: '554 5.7.1 <244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]>: Client host rejected: Access denied

I don't know if outlook is bad configuration but with plesk 9.5 worked well, and now nothing.

I can recive mail but not send.

Best regards.

 

[InderS]

Hello,

Are you using SSL setting on your outlook ? I will suggest you please try to setup outlook without SSL and check it.

 

[Eraklion]

Yes i try

port 587 with TLS ... port 465 with SSL ... port 587 with nothing ... port 25...

But without SSL error is --> Error del servidor: '554 5.7.1 Relay access denied', the autentication need ssl secure, ssl or tls but with this server rejected my email...

 

[Eraklion]

I bring more information as it can help

I find this article http://kb.parallels.com/en/119019 and not work.

When i tray to send an email out from my domain with outlook the log :

Jul 10 11:14:44 ns315915 postfix/smtpd[3412]: warning: 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]: SASL DIGEST-MD5 authentication failed: authentication failure
Jul 10 11:14:44 ns315915 postfix/smtpd[3412]: lost connection after AUTH from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]
Jul 10 11:14:44 ns315915 postfix/smtpd[3412]: disconnect from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]

And not possible.

When i try to send an email out from my domain with Thunderbird or webmail maillog said:

Jul 10 11:16:24 ns315915 postfix/qmgr[31118]: 0AA21B0006F: from=<adrian@cortinadecor.com>, size=27502, nrcpt=1 (queue active)
Jul 10 11:16:24 ns315915 postfix/smtpd[3412]: disconnect from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]
Jul 10 11:16:25 ns315915 postfix/smtp[4082]: certificate verification failed for mx4.hotmail.com[65.55.92.152]:25: untrusted issuer /C=IE/O=Baltimore/OU=CyberTrust/CN=Baltimore CyberTrust Root

And the email is send correctly...

thanks

 

[Eraklion]

More information from logs:

after use http://kb.parallels.com/en/119019

Outlook logs:

Jul 10 12:52:40 ns315915 postfix/smtpd[23944]: connect from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]
Jul 10 12:52:40 ns315915 postfix/smtpd[23944]: NOQUEUE: reject: RCPT from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]: 554 5.7.1 <244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]>: Client host rejected: Access denied; from=<adrian@cortinadecor.com> to=<adrian@cortinadecor.com> proto=ESMTP helo=<InformaticaPC>
Jul 10 12:52:40 ns315915 postfix/smtpd[23944]: lost connection after RCPT from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]
Jul 10 12:52:40 ns315915 postfix/smtpd[23944]: disconnect from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]
Jul 10 12:52:40 ns315915 /usr/lib64/plesk-9.0/psa-pc-remote[14619]: Message aborted.
Jul 10 12:52:40 ns315915 /usr/lib64/plesk-9.0/psa-pc-remote[14619]: Message aborted.

Thunderbirds continues work well his log is:

Jul 10 12:34:18 ns315915 qmail-queue[20188]: scan: the message(drweb.tmp.OzGZb6) sent by adrian@cortinadecor.com to eraklion_boronar@hotmail.com is passed
Jul 10 12:34:18 ns315915 /usr/lib64/plesk-9.0/psa-pc-remote[14619]: handlers_stderr: PASS
Jul 10 12:34:18 ns315915 /usr/lib64/plesk-9.0/psa-pc-remote[14619]: PASS during call 'drweb' handler
Jul 10 12:34:18 ns315915 postfix/qmgr[31118]: F1D6EB0006F: from=<adrian@cortinadecor.com>, size=27514, nrcpt=1 (queue active)
Jul 10 12:34:18 ns315915 postfix/smtpd[20007]: disconnect from 244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]
Jul 10 12:34:19 ns315915 postfix/smtp[20190]: certificate verification failed for mx4.hotmail.com[207.46.8.167]:25: untrusted issuer /C=IE/O=Baltimore/OU=CyberTrust/CN=Baltimore CyberTrust Root
Jul 10 12:34:21 ns315915 postfix/smtp[20190]: F1D6EB0006F: to=<eraklion_boronar@hotmail.com>, relay=mx4.hotmail.com[207.46.8.167]:25, delay=3.3, delays=0.75/0/1.4/1.2, dsn=2.0.0, status=sent (250 <53BE6C2B.6070808@cortinadecor.com> Queued mail for delivery)

 

[GezelKrin]

Hi,
Which email client are you using to send and receive emails? G-Lock?
Please refer to the links below and check if they help:
http://www.symantec.com/business/support/index?page=content&id=TECH169847
http://support.mailhostbox.com/email-administrators-guide/error-codes
In addition, if you are not using Microsoft Outlook as your email client, it's better to contact the support for your mail client for further assistance.
Best Regards

 

[beemol]

Dear Eraklion,
Did you succeed to resolve your problem ?

I have exactly the same problem: I can send mail via Thunderbird, Windows Mail, throu port 587 encrypted. But it does not work via Outlook 2010... (and may be other versions).

All of my logs are the same than you..
I found nothing about that problem except your thread.

Do you find a solution ?

Thanks a lot in advance,

Best Regards,
Stéphane

 

[Eraklion]

Dear Eraklion,
Did you succeed to resolve your problem ?

I have exactly the same problem: I can send mail via Thunderbird, Windows Mail, throu port 587 encrypted. But it does not work via Outlook 2010... (and may be other versions).

All of my logs are the same than you..
I found nothing about that problem except your thread.

Do you find a solution ?

Thanks a lot in advance,

Best Regards,
Stéphane

Hello Stéphane.

I could not found any solution, i contacted with the team of migration and they resolved the problem, but they failed to tell me where there was the problem.

Best regards.

 

[beemol]

Thanks Eraklion for your quick answer !

Ok, so no more clue or help for me :-/

I'll pray to have some good administrator to help me ...

Thanks !

Stéphane

 

[Eraklion]

You're welcome.

i'm sorry can not be of more help.

 

[UFHH01]

Are you using spam control on your server? Anf if yes, which lists are you using?

You could as well set another loglevel ( in this case "debug" for further investigations for a short time ) in your configurations, to get a more detailled output.