Facebook
TwitterMADsserver
New Pleskian
Hi there,
What does the ipv4.domain.tld why is it there?
With kind regards.
What does the ipv4.domain.tld why is it there?
With kind regards.
-
Our team is looking to connect with folks who use email services provided by Plesk, or a premium service. If you'd like to be part of the discovery process and share your experiences, we invite you to complete this short screening survey. If your responses match the persona we are looking for, you'll receive a link to schedule a call at your convenience. We look forward to hearing from you!
-
The BIND DNS server has already been deprecated and removed from Plesk for Windows.
If a Plesk for Windows server is still using BIND, the upgrade to Plesk Obsidian 18.0.70 will be unavailable until the administrator switches the DNS server to Microsoft DNS. We strongly recommend transitioning to Microsoft DNS within the next 6 weeks, before the Plesk 18.0.70 release. -
The Horde component is removed from Plesk Installer. We recommend switching to another webmail software supported in Plesk.
Dns ipv4.domain.tld
- Thread starter MADsserver
- Start date
MADsserver
New Pleskian
Sorry,
I know what i meen.
In the DNS Settings i see ipv4.domain.tld A <ip-adress> what does this do?
Is it the same record as domain.tld A <ip-adress>.
Does anybody know?
I know what i meen.
In the DNS Settings i see ipv4.domain.tld A <ip-adress> what does this do?
Is it the same record as domain.tld A <ip-adress>.
Does anybody know?
It's for when you have a dual stack - ipv4 and ipv6.
www. will have both ipv4 and ipv6 addresses
ipv4. only a ipv4 address
ipv6. will only have a ipv6 address
I'm not sure why you would need it in an ipv4 only environment, maybe there's an RFC for it now.
www. will have both ipv4 and ipv6 addresses
ipv4. only a ipv4 address
ipv6. will only have a ipv6 address
I'm not sure why you would need it in an ipv4 only environment, maybe there's an RFC for it now.
MADsserver
New Pleskian
So just for just for the check?
ipv4.domain.tld A <ip-adress>
Has the same purpuse as:
domain.tld A <ip-adress>
just for the ipv4 or if you use
ipv6.domain.tld A <ip-adress>
its for the ipv6
ipv4.domain.tld A <ip-adress>
Has the same purpuse as:
domain.tld A <ip-adress>
just for the ipv4 or if you use
ipv6.domain.tld A <ip-adress>
its for the ipv6
Yeah, that's correct...
domain.tld A <ipv4-address>
domain.tld AAAA <ipv6-address>
ipv4.domain.tld A <ipv4-address>
ipv6.domain.tld AAAA <ipv6-address>
to be exact.
domain.tld A <ipv4-address>
domain.tld AAAA <ipv6-address>
ipv4.domain.tld A <ipv4-address>
ipv6.domain.tld AAAA <ipv6-address>
to be exact.
MADsserver
New Pleskian
OK so i have a server (Plesk 12 = mail,dns,apache etc: server A: 100.0.0.1) if i use on ipv4 an other server (apache, server B: 200.0.0.2) are these settings correct:?
100.0.0.1 / 24 PTR domain.com.
ftp.domain.com. CNAME domain.com.
ipv4.domain.com. A 200.0.0.2
mail.domain.com. A 100.0.0.1
domain.com. NS ns1.maindomain.net.
domain.com. NS ns2.maindomain.net.
domain.com. A 200.0.0.2
domain.com. MX (10) mail.domain.com.
domain.com. TXT v=spf1 +a +mx -all +a:ns1.maindomain.net
ns.domain.com. A 100.0.0.1
webmail.domain.com. A 100.0.0.1
www.domain.com. CNAME domain.com.
100.0.0.1 / 24 PTR domain.com.
ftp.domain.com. CNAME domain.com.
ipv4.domain.com. A 200.0.0.2
mail.domain.com. A 100.0.0.1
domain.com. NS ns1.maindomain.net.
domain.com. NS ns2.maindomain.net.
domain.com. A 200.0.0.2
domain.com. MX (10) mail.domain.com.
domain.com. TXT v=spf1 +a +mx -all +a:ns1.maindomain.net
ns.domain.com. A 100.0.0.1
webmail.domain.com. A 100.0.0.1
www.domain.com. CNAME domain.com.
