• Our team is looking to connect with folks who use email services provided by Plesk, or a premium service. If you'd like to be part of the discovery process and share your experiences, we invite you to complete this short screening survey. If your responses match the persona we are looking for, you'll receive a link to schedule a call at your convenience. We look forward to hearing from you!
  • The BIND DNS server has already been deprecated and removed from Plesk for Windows.
    If a Plesk for Windows server is still using BIND, the upgrade to Plesk Obsidian 18.0.70 will be unavailable until the administrator switches the DNS server to Microsoft DNS. We strongly recommend transitioning to Microsoft DNS within the next 6 weeks, before the Plesk 18.0.70 release.
  • The Horde component is removed from Plesk Installer. We recommend switching to another webmail software supported in Plesk.

DNS Question

S

slemke

Guest
Hi !

I am using the DNS-Service of Plesk - my Domain is infoworxx.de, the primary DNS Server is ns.infoworxx.de.
Everything works fine.

Now I register a second domain,
testtest.de
for example.
I set up the domain in plesk, the DNS Service is enabled.

When I try to use "ns.infoworxx.de" as Nameserver for "testtest.de" my registrar gives me an error; he says "ns.infoworxx.de" cannot be used as nameserver for the domain.

But on the other side I cannot add in Plesk "testtest.de" in the DNS Service of "infoworxx.de". Is there any possibility to do so ? I would like it, because it "looks" good, if somebody queries the domain.

Regards,
Sebastian
 
pse - it is really important - can nobody help me out ?

?!?!
 
There are a few things you need to take into account when using your own DNS servers.

First of all, you should be aware that some registries are very picky about DNS servers (eg. .dk, .de and .nl). Some like .nl even have an online tool that can be used to verify that a particular DNS server complies with their rules.

Secondly, before you can use ns.adomain.xx as a DNS server, you must register the name server itself via your registrar. For this, you need the IP address pointing to ns.adomain.xx. If you do not know how to register a name server for a domain, contact support at the registrar for that domain. We cannot help you with that since this is not done with PLesk; even worse, it will be slightly different from registrar to registrar.

Thirdly, after your new name server has been registered, just use the PLesk admin screens and change the DNS server for the domain.

I'd like to add the following: I personally prefer to have name servers (at least two) that are not related to the domain. If the server on which the domain is hosted goes down, I can very quickly point to a backup server without needing to adjust the name servers. My choice for years now has been to use ZoneEdit's DNS services and I'm very satisfied with this.

Ron
 
Secondly, before you can use ns.adomain.xx as a DNS server, you must register the name server itself via your registrar. For this, you need the IP address pointing to ns.adomain.xx. If you do not know how to register a name server for a domain, contact support at the registrar for that domain.


Ok, I geuess here is the Problem; I have a Nameserver (ns.infoworxx.de, administrated via Plesk), but this Nameserver does NOT accept any other entries than for the infoworxx.de Domain. I have in my Admin no chance to add an entry for adomain.xx - correct ?

I'd like to add the following: I personally prefer to have name servers (at least two) that are not related to the domain. If the server on which the domain is hosted goes down, I can very quickly point to a backup server without needing to adjust the name servers. My choice for years now has been to use ZoneEdit's DNS services and I'm very satisfied with this.

Ok, thats definitly right ! I will use such a service, too - but nevertheless it would be interesting, if the problem cound be solved another way,too ?

Regards,
Sebastian


Ron [/B][/QUOTE]
 
Ok, I geuess here is the Problem; I have a Nameserver (ns.infoworxx.de, administrated via Plesk), but this Nameserver does NOT accept any other entries than for the infoworxx.de Domain. I have in my Admin no chance to add an entry for adomain.xx - correct ?
No, that's right. If the "master" domain for your (PLesk) server is "infoworxx.de", then you cannot add the domain "adomain.xx" in the control panel for "infoworxx.de". But- you can add the domain "adomain.xx" to the server. This will create a few DNS entries for "adomain.xx" on this server. Your name server ns.infoworxx.de will automatically provide DNS services for "adomain.xx".

However, when I look at infoworxx.de and testtest.de, I get the impression that testtest.de is not located on the same server as infoworxx.de. Is that the case? Are you trying to make ns.infoworxx.de work as a secondary server for a domain that is hosted elsewhere?

Continue using dnsstuff.com and dnsreport.com to check out the details of your domains and name servers. I think you will eventually find a solution.
 
Hi !

it is not testtest.de it is geo-tex.ru - at the time I posted the message the second domain was not available already.

I have just tried an update of the domain with ns.infoworxx.de as primary nameserver.

BTW:
Is it a good idea to use plesk as secondary nameserver and a third party service as primary nameserver ?

Regards,
Sebastian
 
Back
Top