Facebook
Twitter
raphael_suporte
Basic Pleskian
I have a Plesk installation using a single IP with NS1 and NS2. However, I hired an additional IP and I would like to set it for NS2. I was wondering how can I configure the same, so that IP 1 is NS1 and IP2 is NS2.
-
Our team is looking to connect with folks who use email services provided by Plesk, or a premium service. If you'd like to be part of the discovery process and share your experiences, we invite you to complete this short screening survey. If your responses match the persona we are looking for, you'll receive a link to schedule a call at your convenience. We look forward to hearing from you!
-
The BIND DNS server has already been deprecated and removed from Plesk for Windows.
If a Plesk for Windows server is still using BIND, the upgrade to Plesk Obsidian 18.0.70 will be unavailable until the administrator switches the DNS server to Microsoft DNS. We strongly recommend transitioning to Microsoft DNS within the next 6 weeks, before the Plesk 18.0.70 release. -
The Horde component is removed from Plesk Installer. We recommend switching to another webmail software supported in Plesk.
Resolved Doubt - NS1 and NS2 using only one IP, how to add more to NS2?
- Thread starter raphael_suporte
- Start date
Hi raphael_suporte,
If I understood the question correctly, you need to update DNS template/zones and set new IP address as a value for existing NS2 record in Plesk: DNS Template. Are you going to use an additional server with that IP-address as a secondary DNS server, aren't you?
If I understood the question correctly, you need to update DNS template/zones and set new IP address as a value for existing NS2 record in Plesk: DNS Template. Are you going to use an additional server with that IP-address as a secondary DNS server, aren't you?
It's rather a pointless idea to use two IPs on the same server. If it's required by the registrar, oh well.
Otherwise, you only protect against the very specific scenario that one IP fails. Give that it's the same provider, and I'm guessing same subnet, this is really highly improbable. I'd recommend just using your registrars NS.
Otherwise, you only protect against the very specific scenario that one IP fails. Give that it's the same provider, and I'm guessing same subnet, this is really highly improbable. I'd recommend just using your registrars NS.
raphael_suporte
Basic Pleskian
in case you want to know if the NS2 input would be the pattern below
ns2.<domain>. A <ip2>
of course with the proper spaces, here in the case after posting it took off, the spaces I gave
ns2.<domain>. A <ip2>
of course with the proper spaces, here in the case after posting it took off, the spaces I gave
