Question multiple IP-Addresses ?

[mahmut ozdemir]

hello i bought 256 ip addresses how can i add this easily?

 

[dopeboy]

Tools & Settings => IP Addresses => (Click) Reread IP

That will read all your interfaces on server.

 

[mahmut ozdemir]

Tools & Settings => IP Addresses => (Click) Reread IP

That will read all your interfaces on server.

how ? how to read a rope without

 

[dopeboy]

how ? how to read a rope without

without what? if you mean you don't have setup your additional IPv4 addr on your server then you should ask your provider how to, then add them on server.

 

[mahmut ozdemir]

without what? if you mean you don't have setup your additional IPv4 addr on your server then you should ask your provider how to, then add them on server.

data center gives you subnet as soon as you enter server
/24 subnet

 

[dopeboy]

data center gives you subnet as soon as you enter server
/24 subnet

are you sure you did not paid extra money for that? no one gives /24 subnet for free

 

[dopeboy]

anyhow you should have a ip list given by your "data center", along with gateway ip that you'll have to add on your server. after that you have to click "Reread" on plesk.

 

[mahmut ozdemir]

are you sure you did not paid extra money for that? no one gives /24 subnet for free

why give it for free? gave with money?



here is this enough? okey

 

[dopeboy]

anyhow you should have a ip list given by your "data center", along with gateway ip that you'll have to add on your server. after that you have to click "Reread" on plesk.

 

[mahmut ozdemir]

anyway man add one by one hand no problem

 

[Monty]

You could use the "ipmanage" CLI tool from plesk, see:

# plesk bin ipmanage -h

Also read: ipmanage: IP Addresses

If your IPs are all consecutive IP addresses then you could add them with a short shell script like this:

for i in `seq 1 254` ; do plesk bin ipmanage -c 123.123.123.$i -mask 255.255.255.0 -type shared -interface ens192 ; done

This would add IPs from 123.123.123.1 up to 123.123.123.254. You'll have to adapt the script according to your needs.