Postfix and Redirect

[zeroborg]

Hi,

i just updated to PLESK 10.1.1 from 9.5.4.
My OS is OpenSUSE 11.0.
I use postfix as my sendmail.
The problem is that the redirection is not working.
The logs:
Nov 8 11:58:08 s15342249 postfix-local[2235]: call_handlers: PASS during call '/usr/local/psa/handlers/info/10-spam-vLqK7w/executable' handler
Nov 8 11:58:08 s15342249 postfix-local[2235]: files: write buf 0x7fff47fd3a00[992] to fd (7) error - (32) Broken pipe
Nov 8 11:58:08 s15342249 postfix-local[2235]: files: cannot write chuck from 5 to 7 - (32) Broken pipe
Nov 8 11:58:08 s15342249 postfix-local[2235]: LOG Unable to forward message to: XXXXXX@gmail.com
Nov 8 11:58:08 s15342249 postfix-local[2235]: LOG found problems in executed program
Nov 8 11:58:08 s15342249 postfix-local[2235]: Unable to send mail for: XXXXXXX@gmail.com

Please advice.
Thanx,

ZeroBorg

 

[IgorG]

Try to rebuild handlers - http://kb.parallels.com/en/6410

 

[zeroborg]

...

Thanx Igor for your response, but it didn't work out.
It recreated the handler, and it stills doesn't work.
Logs:
Nov 9 18:36:49 s15342249 postfix-local[26261]: call_handlers: PASS during call '/usr/local/psa/handlers/info/10-spam-jLQ8Ji/executable' handler
Nov 9 18:36:49 s15342249 spamd[20303]: prefork: child states: BIBI
Nov 9 18:36:49 s15342249 postfix-local[26261]: files: write buf 0x7fffd0a30470[4096] to fd (7) error - (32) Broken pipe
Nov 9 18:36:49 s15342249 postfix-local[26261]: files: cannot write chuck from 5 to 7 - (32) Broken pipe
Nov 9 18:36:49 s15342249 postfix-local[26261]: LOG Unable to forward message to: XXXXXXX@gmail.com
Nov 9 18:36:49 s15342249 postfix-local[26261]: LOG found problems in executed program
Nov 9 18:36:49 s15342249 postfix-local[26261]: Unable to send mail for: XXXXXXX@gmail.com

Anyway of updating to 10.4 Panel? (it's not available at my Updates)

Thank you!

ZeroBorg

 

[IgorG]

http://www.parallels.com/download/plesk10.4/

Launch the downloaded Parallels Installer script with the --all-versions option to be able to install this version. This option will not be required after the public availability of Panel 10.4 announced by Parallels.

 

[zeroborg]

Thanx

Igor, thanx for your reply.

I have installed Suse 11.0. The downloads are for 11.3 and later.
Is there a problem? Can i use safely that version of autoinstaller?
Thanx.

ZeroBorg.

 

[IgorG]

You should use autoinstaller only for your OS version.

 

[hr.kam]

Hello, I did some observation and mine problem (http://forum.parallels.com/showthread.php?t=208525) is same. Some new information?
I was make switch from qmail to postfix (qmail didn't send emails to some domains). After switch to postfix redirect is broken.

I have big trouble with mailserver now.
Can I install Plesk 10.4 . What I need for this?


There is a cut from log:

Nov 14 09:07:21 87 postfix-local[5171]: hook_dir = '/usr/local/psa/handlers/before-local'
Nov 14 09:07:21 87 postfix-local[5171]: recipient[3] = 'xxx@xxx.eu'
Nov 14 09:07:21 87 postfix-local[5171]: handlers dir = '/usr/local/psa/handlers/before-local/recipient/xxx@xxx.eu'
Nov 14 09:07:21 87 postfix-local[5171]: call_handlers: call executable = '/usr/local/psa/handlers/info/10-dd52-domainkeys-m8cC2i/executable'
Nov 14 09:07:21 87 dk_check[5173]: DK_STAT_NOSIG: No signature available in message
Nov 14 09:07:21 87 postfix-local[5171]: handlers_stderr: PASS
Nov 14 09:07:21 87 postfix-local[5171]: call_handlers: PASS during call '/usr/local/psa/handlers/info/10-dd52-domainkeys-m8cC2i/executable' handler
Nov 14 09:07:21 87 postfix-local[5171]: files: write buf 0xbfffba48[4096] to fd (7) error - (32) Broken pipe
Nov 14 09:07:21 87 postfix-local[5171]: files: cannot write chuck from 5 to 7 - (32) Broken pipe
Nov 14 09:07:21 87 postfix-local[5171]: LOG Unable to forward message to: xxx.xxx@xxx.eu
Nov 14 09:07:21 87 postfix-local[5171]: LOG found problems in executed program
Nov 14 09:07:21 87 postfix-local[5171]: Unable to send mail for: xxx.xxx@xxx.eu
Nov 14 09:07:21 87 postfix/bounce[5177]: warning: inet_protocols: IPv6 support is disabled: Address family not supported by protocol
Nov 14 09:07:21 87 postfix/bounce[5177]: warning: inet_protocols: configuring for IPv4 support only
Nov 14 09:07:21 87 postfix/pipe[30353]: ED3B12410134: to=<xxx@xxx.eu>, orig_to=<xxx@xxx.cz>, relay=plesk_virtual, delay=0.66, delays=0.47/0/0/0.19, dsn=4.3.0, status=deferred (temporary failure. Command output: sh: /usr/sbin/sendmail: No such file or directory 4.2.1 Message can not be delivered at this time )


Thank you for any help.

 

[IgorG]

Did you try to rebuild mailserver settings with

/usr/local/psa/admin/sbin/mchk --with-spam

?
Plesk 10.4 is here - http://www.parallels.com/download/plesk10.4/

 

[hr.kam]

Hello, yes I did this three times. I have this message:
Checking for: mail_spam_restore... fail.

Others are OK.

When I try "wget -O - http://autoinstall.plesk.com/one-click-installer | sh"

I receive:
You have Plesk v 10.3.1 installed.
Please, use Parallels installer from Web Interface or CLI

 

[GunFood]

Try to check for sendmail:

sh: /usr/sbin/sendmail: No such file or directory

edit: better wording.

 

[IgorG]

Try to install sendmail:

Sendmail shouldn't be installed on Plesk server as MTA. It will break mailsystem completely! Only Qmail or Postfix can be used as MTA for Plesk server.

 

[GunFood]

yea, but he should check, if the file exists.
For me (qmail on centOS) it's

#ls -la sendmail*
lrwxrwxrwx 1 root root   21 Nov  2  2009 sendmail -> /etc/alternatives/mta
lrwxrwxrwx 1 root root    4 Sep 14 22:04 sendmail.exim -> exim
-rwxr-xr-x 1 root root 198K May 31 18:29 sendmail.postfix

so the binary is needed.