Update

[FERNANDO_AR07]

Hello,

Trying to figure out how to update the sitebuilder 4.1 to version 4.2, because I find how to install it but not upgrade it, thanks

 

[Dmitry Frantsev]

Just follow installation instructions. Version 4.1 should be automatically updated.

 

[shoggy24]

Dmitry, After updating sitebuilder i noticed that existing site which has been published were unable to use sitepal module. It didnt even show up in the module list at all. Is this normal or do i have a problem with my upgrade.

 

[Dmitry Frantsev]

Make sure that module is installed in Plesk Sitebuilder admin CP -> Server -> Modules section. It should be listed there. If it is installed, then make sure to add it into appropriate plan in Plan Management section.

 

[FERNANDO_AR07]

Then I sitebuilder 4.2 under the instructions and still leave me in the Installation Guide?

In sitebuilder has entered when 4.1: server> Auto update is not out anything.

 

[Dmitry Frantsev]

You can use following instructions for Sitebuilder update from 4.1 to 4.2 version with help of autoinstaller:

1. Go to Parallels web site http://www.parallels.com/en/download/sitebuilder4/ page.
2. Select appropriate target OS in listbox, for example Fedora 7.
3. Click on autoinstaller link and download it into your Sitebuilder server where old version installed. You can download autoinstaller from console with this way:

# wget http://download1.parallels.com/Site...er_v3.3.0_build080201.09_os_FedoraCore_7_i386

4. After autoinstaller is uploaded use following commands to run it:

# chmod +x swsoft_installer_v3.3.0_build080201.09_os_FedoraCore_7_i386
# ./swsoft_installer_v3.3.0_build080201.09_os_FedoraCore_7_i386

or

# sh swsoft_installer_v3.3.0_build080201.09_os_FedoraCore_7_i386

After that follow autoinstaller instructions.

Manual update also possible. In this case refer to documentation.

As for Autoupdate feature please check following thread where you will find detailed explanation about how it works: http://forum.swsoft.com/showthread.php?t=51876&highlight=Autoupdate

 

[FERNANDO_AR07]

Hello Thanks, I CentOS release version 4.4 (Final), which should download? Apart as I know if x86-64 or i386.

 

[Dmitry Frantsev]

You can check platform which you have using 'uname' command:

Type in console 'uname -m' it should display type of the current hardware platform. It will show you if it is x86_64 or not.

 

[FERNANDO_AR07]

Hello, showed i686 which I would have to fall to x86_64, the problem I have now is not which version of sitebuilder selected.

Thanks, I hope your answer.

 

[Dmitry Frantsev]

For your configuration you need to use CentOS 4.3 (i386). Here is a link for autoinstaller.

http://download1.parallels.com/Site...ller_v3.3.0_build080201.09_os_CentOS_4.2_i386

If that want you wanted to know. Let me know if you need anything else.

 

[FERNANDO_AR07]

ok ,Thank you, inform you anything again, greetings.

 

[FERNANDO_AR07]

Hello I have seen already this to download the version 4.2.3 of sitebuilder and I downloaded the autinstaller this direction

http://download1.parallels.com/Site...ller_v3.3.2_build080619.11_os_CentOS_4.2_i386

Now, unlike him last time, I have php 5, there would be any problems upgrading the sitebuilder?

I am lowering the autoinstall correct?

Thanks, I hope your answer.

 

[Dmitry Frantsev]

Sitebuilder uses it's own PHP so you should not worry about that. Just download autoinstaller, run it and follow step-by-step instructions:

# wget http://download1.parallels.com/Site...ller_v3.3.2_build080619.11_os_CentOS_4.2_i386

# chmod +x parallels_installer_v3.3.2_build080619.11_os_CentOS_4.2_i386
#./parallels_installer_v3.3.2_build080619.11_os_CentOS_4.2_i386

Let me know how everything goes.