upgrade 7.5.2 => 7.5.3 failed

[tenma]

I was trying to upgrade the PLESK 7.5.2 ==> 7.5.3

First time:
-----------------------------------------------------------
Unable to resolve hostname or establish network access to
local host: . You should fix this problem prior to installing
Plesk. After you are done, run the installation again.

Error: %pre(psa-7.5.3-rhel3.build75050506.13) scriptlet failed, exit status 1
Error: install: %pre scriptlet failed (2), skipping psa-7.5.3-rhel3.build75050506.13
-----------------------------------------------------------
then, I fixed this problem. (hostname)

Next time
-----------------------------------------------------------
/usr/local/psa/bin/chrootsh already registered as a login shell
Standard build detected. Upgrading canceled, because only
5.0.x versions supported for upgrading from Standard to RPM
builds.

Error: %pre(psa-7.5.3-rhel3.build75050506.13) scriptlet failed, exit status 1
Error: install: %pre scriptlet failed (2), skipping psa-7.5.3-rhel3.build75050506.13
-----------------------------------------------------------

What should I do?

 

[kengtay]

Do you have the 1and1 root server?

 

[tenma]

> Do you have the 1and1 root server?

No.
I do not have the '1and1 root server'.

 

[littlefrog]

Read this thread.

I had the exact same issue

http://forum.sw-soft.com/showthread.php?s=&threadid=24218

And I was able to get it solved

 

[tenma]

Sir 2tonecafe

I did the following rpm commands.

rpm -Uvh --justdb psa-7.5.3-rhel3.build75050506.13.i586.rpm
rpm -Uhv --force --nodeps psa-7.5.3-rhel3.build75050506.13.i586.rpm

Now It works fine!!

I thank your kindness and support.